DUNLOP ULTRA X®

ULTRA X

THE SUPER-STRENGTH ALTERNATIVE
TO CONVENTIONAL MULTI-PLY BELTING

Even the strongest, heaviest belts can be ripped, torn or punctured by heavy, sharp materials or foreign objects, either falling from height or becoming trapped. Belts can often be destroyed within a matter of weeks or months. The Dunlop solution to this very old problem is a new and unique belt design – Dunlop Ultra X.

CONSTRUCTION

Ultra X is a super strength abrasion resistant breaker weft construction single-ply belt that is exclusively made by Dunlop Conveyor Belting including the patented super-tough fabric, which is made in our in-house fabric weaving facility. Ultra X is designed to be a much stronger, more durable alternative to conventional multi-ply belting.

ADVANTAGES OF ULTRA X COMPARED TO TYPICAL MULTI-PLY BELTING

■ More than 3 times greater longitudinal rip resistance
■ Up to 5 times better tear resistance
■ Far superior impact resistance
■ Up to 90% tensile splice strength (using finger splice method)
■ Excellent mechanical fastener retention
■ Greater flexibility – can be used on smaller than usual pulleys

APPLICATIONS

Ultra X1 is designed as a stronger alternative to 250/2, 315/2 and 400/3 abrasion resistant multi-ply belts. Ultra X3 is designed as a strongerEven the strongest, heaviest belts can be ripped, torn or punctured by heavy, sharp materials or foreign objects, either falling from height or becoming trapped. Belts can often be destroyed within a matter of weeks or months. The Dunlop solution to this very old problem is a new and unique belt design – Dunlop Ultra X.

CONSTRUCTION

Ultra X is a super strength abrasion resistant breaker weft construction single-ply belt that is exclusively made by Dunlop Conveyor Belting including the patented super-tough fabric, which is made in our in-house fabric weaving facility. Ultra X is designed to be a much stronger, more durable alternative to conventional multi-ply belting.

ADVANTAGES OF ULTRA X COMPARED TO TYPICAL MULTI-PLY BELTING

■ More than 3 times greater longitudinal rip resistance
■ Up to 5 times better tear resistance
■ Far superior impact resistance
■ Up to 90% tensile splice strength (using finger splice method)
■ Excellent mechanical fastener retention
■ Greater flexibility – can be used on smaller than usual pulleys

APPLICATIONS

Ultra X1 is designed as a stronger alternative to 250/2, 315/2 and 400/3 abrasion resistant multi-ply belts. Ultra X3 is designed as a stronger.

SPLICE STRENGTH ADVANTAGES

Ultra X is best joined using the finger splice method. This creates the strongest and most reliable joint possible by retaining up to 90% of tensile strength. This is because the step splice will always create a proportional ‘loss’ of tensile strength that is the equivalent of one ply.

AVAILABILITY

In order to provide the most economical prices as possible, Ultra X is only available in full rolls of 300m or alternatively of 2 X 150m rolls if necessary. 
The minimum order for each type is 600 square meters (300m X 2000mm) cut in any combination of the following widths:

Ultra X1

500mm , 650mm, 800mm, 1000mm, 1200mm, 1600mm or 2000mm. 

Ultra X3

500mm, 800mm, 1000mm, 1200mm, 1600mm and 2000mm.