CHEVRON AND HIGH CHEVRON BELTS
DUNLOP CHEVRON AND HIGH CHEVRON BELTS
Dunlop ‘super strength’ chevron belts are quite simply the strongest and most reliable chevron belts available today. Unlike nearly all other manufacturers, Dunlop profiles are moulded and vulcanised in one continuous production process together
with the base belt to form a single, homogeneous belt structure. Apart from the far superior strength, another key advantage is that this allows the use of smaller pulley diameters. The 32mm high Chevron profile is typically suitable for smaller lump sizes and conveyor angles up to 20 to 25 degrees. For larger lump sizes and steeper inclines the Dunlop High Chevron profile with 32mm high profiles will provide the solution.
Chevron and High Chevron is successfully used on incline angles up to 30º for a wide variety of materials including domestic and commercial waste, gravel and coal. For sticky materials such as wet sand and earth it can be used on inclines as steep as 40º. It is also a highly effective for conveying packages such as sacks and bales.
The ultra-strong Dunlop Superfort and Dunloflex carcasses with their polyester-nylon (EP) fabric plies provide strong low elongation and are impervious to moisture.
Standard widths range from 400 up to 1600mm, depending on profile height. Dunlop ‘super strength’ chevron belts are available in RA (high abrasion resistant), and ROS (mineral oil resistant) qualities*. Other cover grades available on request. All Dunlop chevron belts are supplied with moulded edges.